Soft temper disks: manufactured using a hot rolling process (DC: Direct Cast) followed by a cold rolling stage and final annealing. Disks with H14 temper: manufactured using a continuous cast mill process, followed by a cold rolling stage, plus intermediate annealing.

Typical Applications

Manufacturing of pots, frying pans, food containers.

.

Standard Format
Disks

Applicable Standards
Aluminum Standards and Data,
The Aluminum Association

ASTM B-209.

Relevant Characteristics

• High resistance to corrosion.
• High ductility in the annealing condition.
• High forming capacity.
• High thermal conductivity


All tolerances conform to Standard AA.

Límites del Producto y Dimensionales

DIAMETER
SPECIFI
CATION (mm)

TOLE
RANCES
(± mm)

THICKNESS SPECIFICATION (mm)

TOLERANCES
(± mm)

MACHINE FINISHING

130.0 - 960.0

1.00

0.450 - 0.630 inc.

0.050

THICKNESS:
0.450 mm
TO 3.200
mm
DIAMETER:
130 TO 960
mm

0.630 - 0.800 inc.

0.060

0.800 - 1.00 inc.

0.070

1.000 - 1.200 inc.

0.080

1.200 - 1.600 inc.

0.080

1.600 - 2.000 inc.

0.090

2.000 - 2.500 inc.

0.100

2.500 - 3.200 inc.

0.120

Mechanical Properties

 

 

 

 

 

 

 

 

ALLOY

TEMPER

TENSILE
STRENGTH
(Kg/mm2)

ELASTIC
LIMIT
(Kg/mm2)

ELONGATION % *

THICKNESS
SPECIFICATION (mm)

MIN.

MAX.

MIN.

0.40
0.63

0.63
1.20

1.20
3.20

1050

O

5.6

9.7

-

17

22

30

H14

9.7

13.3

-

2

3

5

1100

O

7.6

10.7

2.5

17

22

30

H14

11.2

14.8

9.7

2

3

5

3003

O

9.7

13.3

3.6

20

22

25

H14

14.3

18.4

11.7

2

3

5

3105

O

9.8

14.8

2.51

16

19

20

H14

15.3

20.4

12.7

1

2

2

Chemical Composition and Standard Designation

 

 

 

 

 

 

 

AA

Silicon

Iron

Copper

Manga
nese

Magne
sium

Chromium

Designation

1050

0.25

0.40

0.05

0.05

0.05

-

1100

0.95 Si + Fe

0.05-
0.20

0.05

-

-

3003

0.6

0.7

0.05-
0.20

1.0-1.5

-

-

3105

0.6

0.7

0.30

0.30-0.8

0.20-0.8

0.20


 

 

 

 

 

 

 

AA

Nickel

Zinc

Titanium

Other

Aluminum

Designation

C/U

Total

1050

-

0.05

0.03

0.03

-

99.50

1100

-

0.10

-

0.05

0.15

99.00

3003

-

0.10

-

0.05

0.15

Remaining

3105

-

0.40

0.10

0.05

0.15

Remaining

Values shown refer to the maximum percentage by weight allowable by element, except when a different range is established or when explicitly defined otherwise.